OlympiaFJ60

FOR IMMEDIATE RELEASE
Seattle, January 6th/ ARB 4×4 Accessories/ — ARB USA now offers a complete pre-assembled boxed kit, the ARB premium Recovery Kit includes everything the off-roader needs to get started. Whether it be a simple snatch recovery or a more serious winch recovery, the ARB premium recovery kit has it all. Retailing for $407.00, the premium recovery kit represents exceptional value and a savings over purchasing each component individually.
KIT CONTENTS
- 1x P/No. ARB501 Recovery Bag Large
- 1x P/No. ARB705 17,500lb Snatch Strap
- 1x P/No. ARB730 26,500lb x 10’ Tree Trunk Protector
- 1x P/No. ARB720 9,900lb x 66’ Winch Extension Strap
- 1x P/No. ARB220 Recovery Damper
- 1x P/No. GLOVES Leather Recovery Gloves
- 2x P/No. ARB207D 10,640lbs, 3/4” Pin, D-Shackle
- 1x P/No. 10100020 Snatch Block 9000
Note: The ARB Premium Recovery Kit (P/No. RK9) is not suitable for all vehicles. Please verify your recovery working loads before ordering the kit. ARB recommends using a snatch strap that is 3-4x the vehicle weight, therefore, ARB recommends this kit for vehicles 5,600lbs and under. Perfect for Jeep Wranglers, small pick-ups like the Toyota Tacoma and small SUVs like the FJ Cruiser, Nissan Xterra and Toyota 4Runner.

Check with East  Olympia Cruisers for more information.

Similar posts that may be of interest:

Moose Industries Snow Plow on a Land Cruiser

Related posts brought to you by Yet Another Related Posts Plugin.

Seattle, October 21/ ARB 4×4 Accessories/

ARB’s new Air Locker Bearing Puller Kit is a professional tool that no automotive differential installer should be without. As original equipment differential bearings have become more expensive and often difficult to source, it has been increasingly important to attempt to remove the original bearing without causing any damage to it.

As a part of ARB’ new Air Locker Tools range of differential service/installation equipment, this specialty tool offers a unique way of removing a differential carrier bearing without the need to get access under the seating face of the bearing cone.

Features:
- Quickly and easily removes the carrier bearings from most automotive differentials
- Removes without the same level of risk of carrier bearing damage and Air Locker seal surface damage
damage associated with most commercially available bearing pullers.
- Is able to remove many bearings that standard bearing pullers cannot
- Works with most models of ARB Air Locker and OEM differential centers
- Comes in a durable carry case with a dedicated powder coated parts tray for easy storage and transport (more…)

Similar posts that may be of interest:

Free Air compressor with Air Locker Purchase

Related posts brought to you by Yet Another Related Posts Plugin.

AIRLOCKER, INC.
4×4 Accessories
720 SW 34th Street
Renton, WA 98057
Tel. 425 264 1391 | Fax: 425 264 1392
www.arbusa.com

FOR IMMEDIATE RELEASE

Seattle, February 5/ ARB 4×4 Accessories/ — ARB is proud to announce the impending release of the Series III range of Simpson tents, annex, awnings and various accessories. With over six months of re-design work and moving to a new factory for improved quality assurance, the Series III tent incorporates an updated design and new materials for better strength, rigidity and water resistance.
Simpson Tent
Structure
Working on the knowledge gained from over three years of both sales and testing, along with valuable feedback offered by our broad worldwide customer base, we have made significant improvements to the structure of the tent base and frame. The base is now manufactured from vacuum laminated ABS materials, offering superior strength and insulation. The roof bows have been increased from 16mm raw aluminium tube to 25mm anodized aluminum tube, increasing the erected stability of the entire tent structure and decreasing excessive movement in adverse weather conditions.
Canvas
The Series III canvas offers greatly improved water proofing ability with the increase from 240gsm (Grams Per Sq. Meter) rip-stop canvas to a heavier 300gsm Poly/Cotton rip-stop canvas with Polyurethane coating. All stitched seams now feature welded seam tape to eliminate seepage through needle punch holes. Hinges have been upgraded from 3mm steel to 4mm braced steel for extra strength and all plastic fittings have been upgraded from PVC to a more durable Nylon based material. The veranda now incorporates dual extendable bows which allow for better tensioning of the tent canvas as well as increasing internal space. Fully adjustable,
these are locked in place with a simple screw type locking ring.
Overall, everything is more ‘rounded’, allowing easier use of the cover, elimination of injury from sharp parts and a far better appearance.
Gone are the small eyelets that were used for locating the window rods in the aluminium frame. These are replaced with over locked openings, allowing for easier location (more…)

Similar posts that may be of interest:

Trailer Tent – Camp Bug I

Off-road Tent Trailer Build, Part3

Camp Bug I gets a few new accessories

Related posts brought to you by Yet Another Related Posts Plugin.