Thu 3 May 2007
Man-a-Fre header install
Posted by Brandon under Tech
I recently installed a set of headers from Man-A-Fre. They are nicely finished. I also chose to use their y-pipe so I didn’t have to get it to a shop to finish the project. I also installed the their fluid heat riser, even though the climate here is mostly mild.
Fluid heat riser on bottom of intake manifold
Fitted on the bench
My only criticism was the incorrect bolts to connect to the y-pipe. I had to go get some sorter, larger diameter bolts to finish the project.
Similar posts that may be of interest:
Related posts brought to you by Yet Another Related Posts Plugin.
